mirror of
https://github.com/stevenhowes/MX5-Arduino.git
synced 2026-05-26 15:53:40 +01:00
Steve Howes
58 lines
3.1 KiB
C
58 lines
3.1 KiB
C
// MAP Sensor
|
|
const int map_sensor_min_kpa = 20; // Physical minimum of the hardware
|
|
const int map_sensor_max_kpa = 250; // Physical maximum of the hardware
|
|
const int map_range_min = 20; // Index 0 (min we care about)
|
|
const int map_range_max = 100; // Index 15 (max we care about, anything >100 can be atmospheric as far as we care)
|
|
byte map_current_index = 0; // Index
|
|
byte map_current_value = 0; // KPA value
|
|
|
|
// Rotation
|
|
byte rpm_limited = 0;
|
|
byte rpm_limited_log = 0;
|
|
const int rpm_range_min = 0; // Index 0
|
|
const int rpm_range_max = 7200; // Index 15
|
|
byte rpm_current_index = 0; // Table index of current RPM
|
|
int rpm_current_value = 0; // Current engine RPM
|
|
int usec_per_degree = 0; // uSec per degree of rotation at current RPM
|
|
//unsigned long usec_per_degree = 0;
|
|
|
|
// Cam Angle Sensor
|
|
unsigned long cas_sgt_lastrise = 0; // micros() of the last rise
|
|
unsigned long cas_sgt_lastfall = 0; // "" of the last fall
|
|
byte cas_sgt_lastvalue = 0; // The state of SGT on previous cycle
|
|
|
|
unsigned long cas_sgc_lastrise = 0; // micros() of the last rise
|
|
unsigned long cas_sgc_lastfall = 0; // "" of the last fall
|
|
byte cas_sgc_lastvalue = 0; // The state of SGC on the previous cycle
|
|
|
|
byte cas_sync_fail = 0;
|
|
byte cas_sync_fail_log = 0;
|
|
|
|
// Cylinder sequencing
|
|
byte cylinder_tdc = 0; // Most recent cylinder to hit TDC
|
|
byte cylinder_next_fire = 0; // Next cylinder due a spark
|
|
//byte cylinder_next_inject = 0; // Next cylinder due fuel
|
|
// Sequential and wasted spark
|
|
//byte cylinder_next[] = {0,3,1,4,2}; // For 1-3-4-2 Current cylinder as index returns next cylinder
|
|
byte cylinder_next[] = {0,2,1,2,1}; // For 1-3-4-2 Current cylinder as index returns next cylinder
|
|
|
|
// Ignition
|
|
const int coil_dwell = 4000; // 5ms for stock coil
|
|
const int ignition_offset = 0;
|
|
|
|
// Tachometer
|
|
const int tach_pulse_length = 5000; // 5ms equiv to dwell time on old coil at sensible RPM (tach pulse length)
|
|
|
|
// O2 sensor
|
|
//const int o2_min = 200; // 200mV is lean
|
|
//const int o2_target = 450; // 450mV is 14.7:1 apparently...
|
|
//const int o2_max = 800; // 800mv is rich
|
|
//int o2_current_value = 0; // Curent milivolts
|
|
|
|
// Battery
|
|
byte battery_voltage_value = 13;
|
|
byte battery_voltage_index = 7;
|
|
const int battery_cal_7v = 252;
|
|
const int battery_cal_16v = 579;
|
|
|