mirror of
https://github.com/stevenhowes/wbios.git
synced 2026-05-26 15:53:34 +01:00
Initial commit of 1.11 source as released by PC Engines
Original source https://www.pcengines.ch/file/wbios111s.zip
This commit is contained in:
Steve Howes
+240
@@ -0,0 +1,240 @@
|
||||
;
|
||||
; TinyBIOS, configured for National SC1100, PC Engines WRAP board
|
||||
;
|
||||
; (C)1998-2003 Pascal Dornier / PC Engines; All rights reserved.
|
||||
;
|
||||
; v1.11
|
||||
; pd 051108 extend PCI reset pulse width
|
||||
;
|
||||
; v1.10
|
||||
; pd 050625 add option for slower DRAM clock
|
||||
;
|
||||
; v1.08
|
||||
; pd 050502 be less picky about IDE device IDs
|
||||
;
|
||||
; v1.07
|
||||
; pd 050417 add delay on warm start (protect CF integrity)
|
||||
; add serial console disable option
|
||||
;
|
||||
; v1.06
|
||||
; pd 050227 fix serial port configuration; neutral message on
|
||||
; WRAP setup; add USB, PXE configuration option;
|
||||
; Int 15 function E820 memory map.
|
||||
; Disable COM2 IR UART.
|
||||
;
|
||||
; v1.05
|
||||
; pd 041021 add platform ID at end
|
||||
;
|
||||
; v1.03
|
||||
; pd 040705 Configure latency + line size on ALL slots (incl. 68).
|
||||
;
|
||||
; v1.02
|
||||
; pd 040315 Add PCI reset on reset entry.
|
||||
;
|
||||
; v1.01
|
||||
; pd 040220 Change to generic message, leave space for patch
|
||||
; pd 040220 Add USB_EN option.
|
||||
|
||||
; start offset
|
||||
|
||||
STARTOFS equ 09000 ;start offset, must be multiple of 256
|
||||
CFG_OFS equ 08000 ;start of config block
|
||||
|
||||
db STARTOFS dup 0 ;(start data cut out by BIOSSUM.EXE)
|
||||
|
||||
#if def CFG_OFS
|
||||
include wrap_cfg.8 ;include config offsets
|
||||
#endif
|
||||
|
||||
; platform specific options
|
||||
|
||||
WRAP1C: ;select new interrupt mapping
|
||||
|
||||
WRAP: ;select WRAP platform
|
||||
|
||||
;USB_EN: ;enable USB controller -> now configured
|
||||
;by cfg_usb
|
||||
|
||||
ROM_BEG equ 0c800 ;start of option ROM scan
|
||||
ROM_END equ 0f000 ;end of option ROM scan
|
||||
|
||||
PCI_NORST equ 090 ;don't reset 5530
|
||||
PCI_NORST2 equ 098 ;don't reset USB
|
||||
PCI_NORST3 equ 000 ;don't reset GX1
|
||||
|
||||
; PCI options
|
||||
|
||||
INTA equ 9 ;PCI interrupt assignment
|
||||
INTB equ 10 ;also see PCI_TAB
|
||||
INTC equ 11
|
||||
INTD equ 12
|
||||
INT0 equ 0ff ;no interrupt assigned
|
||||
|
||||
; general options
|
||||
|
||||
;BOOTBEEP: ;enables beep on bootup
|
||||
|
||||
;DEBUG: ;debug mode (Int 13 trace etc).
|
||||
|
||||
;QUICKMEM: ;no memory test (fill only)
|
||||
MTEST_1PASS: ;quicker memory test (1 pass)
|
||||
|
||||
; hard disk, boot options
|
||||
|
||||
FORCE_LBA equ 1024 ;use LBA if more than x cylinders
|
||||
|
||||
;BOOT_AC: ;Boot A: first, then C:
|
||||
;comment out for C: then A:
|
||||
|
||||
;HD_WAIT equ 20 ;Hard disk wait, max. x seconds
|
||||
;HD_ENA equ 0 ;don't check HDD status before x seconds
|
||||
|
||||
HD_INFO: ;display hard disk info
|
||||
|
||||
HDD_LOOSE: ;don't be picky about device ID
|
||||
|
||||
HDD_EDD: ;enable EDD support
|
||||
|
||||
HDD_LBA: ;enable LBA support
|
||||
|
||||
HDD_NOSLAVE: ;don't look (and wait) for slave device
|
||||
|
||||
;HD_TIME equ 080 ;commented out = HDD power down disabled
|
||||
;0 = code included, but no timeout
|
||||
;1..240 = timeout x * 5 s units
|
||||
;241..251 = timeout (x-240)*30 min
|
||||
|
||||
; keyboard options
|
||||
|
||||
NO_KBC: ;don't fail if KBC not present
|
||||
|
||||
INT15_24: ;option: A20 gate functions
|
||||
|
||||
;LED_UPDATE: ;Define to enable keyboard LED updates
|
||||
;(NumLock, CapsLock, ScrollLock).
|
||||
;Not recommended for real-time apps.
|
||||
|
||||
; serial port options
|
||||
|
||||
CONSOLE equ 03F8 ;serial port for console = COM1
|
||||
CONRATE equ 12 ;default baudrate
|
||||
;3 = 38400, 12 = 9600 - override by
|
||||
;CFG_BAUD
|
||||
CONINT equ 4 ;interrupt for console
|
||||
COM_NO2400: ;prevent DOS 2400 baud setting...
|
||||
|
||||
;
|
||||
; Signon prompt (must be at start of binary, 4KB step,
|
||||
; for patch utility to work)
|
||||
;
|
||||
copysig: db "##" ;
|
||||
copysum: db 0 ;checksum
|
||||
copyrt:
|
||||
#if def WRAP1C
|
||||
db "PC Engines WRAP.1C/1D/1E v1.11",13,10,0
|
||||
#else
|
||||
db "PC Engines WRAP.1A/1B v1.11",13,10,0
|
||||
#endif
|
||||
db copysig+256-$ dup (0) ;pad to 256 byte limit
|
||||
|
||||
include ..\message.8
|
||||
;
|
||||
; Include files
|
||||
;
|
||||
include ..\equ.8 ;general equates
|
||||
include gxm.8 ;SC1200 chipset / system specific code
|
||||
include sio.8 ;super I/O initialization
|
||||
include post.8 ;POST (with local modifications)
|
||||
include ..\post2.8 ;POST routines
|
||||
include ..\debug.8 ;Debug routines, comment out
|
||||
include ..\vid.8 ;video BIOS
|
||||
include ..\int1x.8 ;miscellaneous interrupts
|
||||
include ..\fdd.8 ;floppy BIOS
|
||||
include ..\hdd.8 ;hard disk BIOS
|
||||
include ..\com.8 ;serial BIOS
|
||||
include ..\kbd.8 ;keyboard BIOS
|
||||
include ..\kbtab.8 ;keyboard table
|
||||
include ..\lpt.8 ;printer BIOS
|
||||
include ..\rtc.8 ;timer / RTC BIOS
|
||||
include ..\pci.8 ;PCI BIOS
|
||||
include ..\pcipnp.8 ;PCI plug & play
|
||||
#if def PS2MOUSE
|
||||
include ..\ps2mous.8 ;PS/2 mouse BIOS
|
||||
#endif
|
||||
#if def CFG_OFS
|
||||
include wrap_set.8 ;WRAP setup module
|
||||
include wrap_xm.8 ;WRAP xmodem module
|
||||
#endif
|
||||
;
|
||||
; OEM decision: verify diagnostic flags to decide
|
||||
; whether to boot or display error messages
|
||||
;
|
||||
decide: mov dx,GPIOBASE+0 ;GPDO0 GPIO out 0 sc196
|
||||
in eax,dx
|
||||
or eax,040008 ;turn off LED2/G3 and LED3/G18
|
||||
out dx,eax
|
||||
|
||||
mov dx,LPCBASE+010 ;LAD_EN LPC address enable sc204
|
||||
in eax,dx
|
||||
and eax,07FFF ;disable LPC flash
|
||||
out dx,eax
|
||||
|
||||
mov ax,04008 ;PCI latency, cache line size
|
||||
mov ebx,08000680C ;set for miniPCI + LAN
|
||||
decide2: call pci_setw ;pd 040705 fix
|
||||
inc bh
|
||||
cmp bh,090
|
||||
jb decide2
|
||||
|
||||
#if def wrap_set
|
||||
call wrap_set
|
||||
#endif
|
||||
ret
|
||||
;
|
||||
; BIOS writeable configuration data
|
||||
;
|
||||
include ..\data.8
|
||||
;
|
||||
; INT 1A legacy entry point
|
||||
;
|
||||
db (0fe6e-$) dup 0ffh ;explicitly documented in the
|
||||
jmp int1a ;PCI BIOS spec.
|
||||
;
|
||||
; PCI interrupt assignment table
|
||||
;
|
||||
PCI_TAB: db INT0,INT0,INT0,INT0 ;00 north bridge
|
||||
db INT0,INT0,INT0,INT0 ;08
|
||||
db INT0,INT0,INT0,INT0 ;10
|
||||
db INT0,INT0,INT0,INT0 ;18
|
||||
db INT0,INT0,INT0,INT0 ;20
|
||||
db INT0,INT0,INT0,INT0 ;28
|
||||
db INT0,INT0,INT0,INT0 ;30
|
||||
db INT0,INT0,INT0,INT0 ;38
|
||||
db INT0,INT0,INT0,INT0 ;40
|
||||
db INT0,INT0,INT0,INT0 ;48
|
||||
db INT0,INT0,INT0,INT0 ;50
|
||||
db INT0,INT0,INT0,INT0 ;58
|
||||
db INT0,INT0,INT0,INT0 ;60
|
||||
#if def WRAP1C
|
||||
db INTD,INTA,INT0,INT0 ;68 AD23 miniPCI J6
|
||||
db INTB,INT0,INT0,INT0 ;70 AD24 LAN U13
|
||||
db INTA,INT0,INT0,INT0 ;78 AD25 LAN U12
|
||||
db INTC,INT0,INT0,INT0 ;80 AD26 LAN U11
|
||||
db INTA,INTD,INT0,INT0 ;88 AD27 miniPCI J5
|
||||
#else
|
||||
db INT0,INT0,INT0,INT0 ;68
|
||||
db INTD,INTA,INT0,INT0 ;70 AD24 miniPCI J6
|
||||
db INTB,INT0,INT0,INT0 ;78 AD25 LAN U12
|
||||
db INTC,INT0,INT0,INT0 ;80 AD26 LAN U11
|
||||
db INTA,INTD,INT0,INT0 ;88 AD27 miniPCI J5
|
||||
#endif
|
||||
db INTA,INTB,INTC,INTD ;90 AD28 south bridge
|
||||
db INTA,INTB,INTC,INTD ;98 AD29 USB
|
||||
db INT0,INT0,INT0,INT0 ;remaining devices
|
||||
pci_tab9: ;end of table
|
||||
include ..\tables.8 ;ISA initialization tables
|
||||
|
||||
safeorg 0ffd0
|
||||
db "PC Engines WRAP.1",0
|
||||
|
||||
include ..\reset.8 ;reset vector
|
||||
Reference in New Issue
Block a user