MX5-Arduino/pins.h

//const int  pin_idle_control     = 5;    // OUT: Idle valve ground
const int pin_cas_sgc             = 19;   // IN: crank pulse - yellow/blue
const int pin_cas_sgt             = 18;   // IN: ignition pulse -white
//const int pin_fuel_pump         = 45;   // OUT: Fuel relay ground
//const int pin_fan               = 47;   // OUT: Fan relay ground
const int pin_tach                = 49;  // OUT: pulse for tach
//const int pin_intake_temp       = A0;   // IN: Intake temperature
//const int pin_coolant_temp      = A1;   // IN: Coolant temperature
const int pin_throttle            = A2;   // IN: Throttle position
const int pin_map                 = A3;   // IN: Manifold absolute pressure
const int pin_batt                = A4;   // IN: Battery voltage
//const int pin_o2                = A8;   // IN: O2 sensor

const int pin_injector1 = 8;
const int pin_injector2 = 9;
const int pin_injector3 = 10;
const int pin_injector4 = 11;

const int pin_coil1 = 47;
const int pin_coil2 = 45;