Much better debug output (controlled) and live re-map support (ha)

ECU.ino

@@ -19,11 +19,11 @@ void setup() {
   digitalWrite(pin_coil1, LOW);
   digitalWrite(pin_coil2, LOW);
 
+  // Injector Outputs
   pinMode(pin_injector1, OUTPUT);
   pinMode(pin_injector2, OUTPUT);
   pinMode(pin_injector3, OUTPUT);
   pinMode(pin_injector4, OUTPUT);
-
   digitalWrite(pin_injector1, LOW);
   digitalWrite(pin_injector2, LOW);
   digitalWrite(pin_injector3, LOW);

cas.ino

@@ -46,8 +46,12 @@ void cas_process()
         // We'll drop sparks until we're back and log it
         if(cylinder_next_seq[cylinder_tdc] != 1)
         {
-          cas_sync_fail=1;
+          // Don't output if it's already happened once
+          if(cas_sync_fail == 0)
             cas_sync_fail_log=1;
+
+          // Log fail so we abandon time sensitive stuff
+          cas_sync_fail=1;
         }
         else
         {

debug.ino

@@ -1,48 +1,20 @@
+byte debug_live_index = 0;
+byte debug_rpm = 0;
+
 void debug_setup()
 {
   Serial.begin(115200);
 
+  // Flush
   Serial.println("");
   Serial.println("");
 
-  Serial.print("DAT: ");
-  Serial.print("map_current_index");
-  Serial.print(",");
-  Serial.print("rpm_current_index");
-  Serial.print(",");
-  Serial.print("battery_voltage_index");
-  Serial.print(",");
-  Serial.print("map_current_value");
-  Serial.print(",");
-  Serial.print("rpm_current_value");
-  Serial.print(",");
-  Serial.print("battery_voltage_value");
-  Serial.print(",");
-  Serial.print("throttle_current_value");
-  Serial.println("");
-
   // Now we have init we can do real loop
   task_debug = 1;
 }
 
 void task_debug_run()
 {
-  Serial.print("DAT: ");
-  Serial.print(map_current_index);
-  Serial.print(",");
-  Serial.print(rpm_current_index);
-  Serial.print(",");
-  Serial.print(battery_voltage_index);
-  Serial.print(",");
-  Serial.print(map_current_value);
-  Serial.print(",");
-  Serial.print(rpm_current_value);
-  Serial.print(",");
-  Serial.print(battery_voltage_value);
-  Serial.print(",");
-  Serial.print(throttle_current_value);
-  Serial.println("");
-
   // Log if we're out of sync timing-wise
   if(cas_sync_fail_log > 0)
   {
@@ -56,6 +28,156 @@ void task_debug_run()
     Serial.println("ERR: RPM limit");
     rpm_limited_log = 0;
   } 
+
+  // If we're outputting live index - print it
+  if(debug_live_index == 1)
+  {
+    Serial.print("IDX: ");
+    Serial.println(rpm_current_index + (map_current_index << 4));
+  }
+
+  // If we're currently outputting RPM - print it
+  if(debug_rpm == 1)
+  {
+    Serial.print("RPM: ");
+    Serial.println(rpm_current_value);
+  }
+  
+  // If we're being asked for something
+  if (Serial.available() > 0)
+  {
+    // Kills ignition and injection until CAS re-sync (for safety in long I/O)
+    task_debug_safekill();
+
+    // Read the first char (the command)
+    char readbyte = Serial.read();
+
+    
+    if(readbyte == 't') // Dump table
+    {
+      readbyte = Serial.read();
+
+      // i for ignition and f for fel
+      if(readbyte == 'f')
+        task_debug_dumpfueltable();
+      else if(readbyte == 'i')
+        task_debug_dumpignitiontable();
+    }
+    else if(readbyte == 'T') // Ammend table
+    {
+      // Up to the first comma is the table (as on a read)
+      String table = "";
+      while(1)
+      {
+        readbyte = Serial.read();
+        if(readbyte == ',')
+          break;
+        else
+          table += readbyte;
+      }
+
+      // The next parameter is the index in the table (TODO: bounds check?)
+      String index = "";
+      while(1)
+      {
+        readbyte = Serial.read();
+        if(readbyte == ',')
+          break;
+        else
+          index += readbyte;
+      }
+
+      // The final section is the value in decimal (TODO: bounds check?)
+      String value = "";
+      while(1)
+      {
+        readbyte = Serial.read();
+        if(readbyte == '\n')
+          break;
+        else
+          value += readbyte;
+      }
+
+      // Update the value
+      if(table == "i")
+      {
+        table_ignition[index.toInt()] = value.toInt();
+      }else if(table == "f")
+      {
+        table_pulsewidth[index.toInt()] = value.toInt();
+      }
+    }else if(readbyte == 'i') // Disable index output
+    {
+      debug_live_index = 0;
+    }else if(readbyte == 'I') // Enable index output
+    {
+      debug_live_index = 1;
+    }else if(readbyte == 'r') // Disable RPM output
+    {
+      debug_rpm = 0;
+    }else if(readbyte == 'R') // Enable RPM output
+    {
+      debug_rpm = 1;
+    }
+  }
 }
 
+// Outputs the fuel table as JSON
+void task_debug_dumpfueltable()
+{
+  Serial.print("TBF: [");
+  for(int i=0; i <= 255; i++)
+  {
+    Serial.print(table_pulsewidth[i]);
+    if(i != 255)
+    Serial.print(",");
+  }
+  Serial.print("]\n");
+}
+
+// Ignition table as json
+void task_debug_dumpignitiontable()
+{
+  Serial.print("TBI: [");
+  for(int i=0; i <= 255; i++)
+  {
+    Serial.print(table_ignition[i]);
+    if(i != 255)
+    Serial.print(",");
+  }
+  Serial.print("]\n");
+}
+
+// Stops charging all coils, closes all injectors
+// Marks CAS as out of sync to prevent anything changing
+void task_debug_safekill()
+{
+  // Stop charging coils
+  task_coilx_fire_run(pin_coil1);
+  task_coilx_fire_run(pin_coil2);
+
+  // Close all injectors
+  task_injectorx_close_run(pin_injector1);
+  task_injectorx_close_run(pin_injector2);
+  task_injectorx_close_run(pin_injector3);
+  task_injectorx_close_run(pin_injector4);
+
+  // Cancel all scheduled timing-sensitive events
+  task_coil1_charge       =     0;
+  task_coil1_fire         =     0;
+  task_coil2_charge       =     0;
+  task_coil2_fire         =     0;
+  task_injector1_open       =     0;
+  task_injector1_close      =     0;
+  task_injector2_open       =     0;
+  task_injector2_close      =     0;
+  task_injector3_open       =     0;
+  task_injector3_close      =     0;
+  task_injector4_open       =     0;
+  task_injector4_close      =     0;
+
+  // And dont schedule any more until we're back in sync (two Cly1 TDC events matching predictions)
+  cas_sync_fail=1;
+  cas_sync_fail_log=0;
+}
 

tables.h

@@ -1,8 +1,16 @@
 // X = RPM 0 - 7200
-// Y = kPA 250 - 20
+// Y = kPA 20 - 250
 // Index = [rpm_current_index + (map_current_index << 4)]
 // Value = injector base pulse width
 int    table_pulsewidth[]    = {
+              2010, 2020, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2030, 2040, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              3000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 4000, 
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
@@ -10,19 +18,11 @@ int    table_pulsewidth[]    = {
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
               2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
+              2050, 2060, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2070, 2080
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 
-              2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000, 2000
             };
 
-// X = RPM 0 - 7200
+// X = RPM 0 - 15 (0 - 7200)
-// Y = kPA 250 - 20
+// Y = kPA 0 - 15 (20 - 250)
 // Index = [rpm_current_index + (map_current_index << 4)]
 // Value = degrees
 byte    table_ignition[]    = {
@@ -44,14 +44,14 @@ byte    table_ignition[]    = {
               10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10
             };
 
-// X = Voltage 7-16
+// X = Voltage 0 - 9 (7-16)
 // Index = [battery_voltage_index]
 // Value = additional dwell in usec
 const int table_dwell_voltage[]     = {
               2000, 2000, 2000, 2000, 1000, 0, 0, 0, 0, 0
             };
 
-// X = RPM 0 - 7200
+// X = RPM 0 - 15 (0 - 7200)
 // Index = [rpm_current_index]
 // Value = additional dwell in usec
 const int table_dwell_rpm[]     = {